Հեռախոսների աքսեսուարներ

Description

1. Material: PC+TPE
2. Current: 2A
3. Support charging and audio synchronization
4. Built-in DSP function independent DAC decoding chip, high-speed and stable audio transmission
5. Fully compatible with IOS 12.1.4 system
6. Size: 120x27x31mm

Description

1. Material: PC+TPE
2. Current: 2A
3. Support charging and audio synchronization
4. Built-in DSP function independent DAC decoding chip, high-speed and stable audio transmission
5. Fully compatible with IOS 12.1.4 system
6. Size: 120x27x31mm

Description

1. Replacement LCD screen + touch screen digitizer assembly for Huawei Honor Play 9A / MOA-AL00 / MOA-TL00 / MED-AL20 / MOA-AL20
2. Replace the old, broken, cracked, damaged one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.


Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display.

Description

1. Material: aluminum alloy + plastic
2. Use size: 4.7-12.9 inches universal
3. Base clamp: about 90mm
4. Suitable for scenes: places that can be clamped such as desktop and bedside
5. Can be adjusted 180 degrees up and down, 360 degrees horizontal and vertical adjustment
6. High-strength tension spring, firmly stuck to the phone/tablet
7. Suitable for 0-90mm thick table board, not easy to scratch and damage
8. Simple installation

Description

1. Double groups of high-quality batteries
2. Universal data line for all Type-C interface/8 Pin interface
3. Strong, wear-resistant and anti-pull
4. Strong compatibility, durable, portable, safe and environmentally friendly
5. 5A high current fast charge, stable charging and not easy to heat up

Specifications:
1. Material: PU leather, zinc alloy
2. Conductor: high purity copper wire 18 core
3. Number of branch connectors: single head
4. Uses: charging, data transmission, accessories
5. Length: 20 cm
6. Net weight: 13g
7. Product folded size: 17cm
8. Output: 5V 2.4A
9. Data transmission speed: USB 2.0, 480Mbps

Description

1. TPE material cable, wear-resistant and durable.
2. Highly conductive copper core, serves for stable and fast charging efficiency.
3. 3A max output, can transmit data at the same time.
4. Intelligent current control, with overcharge protection.
5. 540-degree free rotating joint design, convenient for mobile phone operation while charging.
6. 7 Pin magnetic contact, strong magnetic force, fast connection.
7. LED indicates soft light, warm reminder for charging.

Description

1. The device can be placed horizontally or vertically
2. Suitable for simultaneous charging of mobile phones & Apple Watches & AirPods 1/2 / Pro
3. 15W high power fast charging
4. Intelligent matching current; metal foreign body detection and protection
5. Sensitive, it can be charged even with a phone case
6. Touch the LED light, the light is soft and not dazzling
7. Multiple protection, safer to use
8. The compact charging stand can place all the devices in one place, no need to insert multiple chargers, the cable is not messy, practical and convenient
9. Can be widely used indoors, such as homes, offices, hotels, restaurants and bars, etc.

Product specifications:
1. Mobile phone output power: 15W/10W/7.5W/5W
2. Watch output power: 3W
3. Headphone output power: 2W
4. Input voltage/current: 9V 4A, 12V 2.5A
5. Input interface: Type-C
6. Sensing distance: less than 5mm
7. Material: ABS+Zinc Aluminum Alloy
8. Size: 17.5x12x8.5cm

Description

Ring LED Light
1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle (The holder is not included).
2. The ring light is made of 2x48pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography.
3. 3 colors lighting mode adjustable brightness for your choose,you can adjust the color and brightness very easily, excellent brightness can be achieved without installing extra colorful filters. Three colors of soft natural light illuminate your beauty in different occasions.
4. The USB ports can be used with multiple devices, such as connect computer host, laptop, mobile power and USB charger. You will be able to enjoy LED ring light at any time free.
5. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc.
6. The phone clamp suitable for the cellphone width of 6-8.5cm.
7. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.
8. When LED ring light is on, press and hold the ON/OFF button until to the indicator flashes. At this time, enter the delay off mode, delay one minute.

Specifications
1. Lamp bead model: 2835
2. Lamp brightness: 24-26lm
3. White light color temperature: 6500K
4. Warm white color temperature: 3200K
5. Power: 0.3W-9.3W
6. Voltage: 5V
7. CRI: >90
8. Dimming range: 1%-100%
9. Shell material: ABS, Acrylic light cover
10. Power supply: USB port power supply
11. Cable length: 2m

Package List
1. Ring LED Light x 1
2. Tripod Ball Head x 1
3. USB Cable Wire Control x 1
4. Phone Clamp x 1
5. Color Package Box x 1

Նկարագրություն

Ring LED լույս
1. LED օղակաձեւ լույսը կարող է տեղադրվել կրիչի վրա և տանել այն ցանկացած վայրում, եռոտանի գնդիկի գլուխը 360 աստիճանի պտտվող է (ամրակը ներառված չէ) ,
2. Օղակաձեւ լույսը պատրաստված է 2x48 հատ հատ էներգիայի խնայող LED ուլունքներից, 
3. 3 գույնի լուսավորության ռեժիմ
4. USB պորտերը կարող են օգտագործվել բազմաթիվ սարքերի հետ
5. Թեթև և շարժական դիզայն. Հարմար է օգտագործման և տեղափոխման համար,
6. Բջջային հեռախոսի 6-8,5 սմ լայնության համար հարմար սեղմիչ:
7. Հարմար է վլոգինգի, տեսանյութերի նկարահանման համար 
8. Երբ LED օղակի լույսը միացված է, սեղմեք և պահեք ON / OFF կոճակը, 

Տեխնիկական պայմաններ
1. Բշտիկների քանակը ՝ 40 հատ
2. Լամպի հատիկի մոդել ՝ 2835
3. Լամպի պայծառությունը `24-26 լմ
4. Սպիտակ լույսի գույնի ջերմաստիճանը ՝ 6500K
5. Հզորությունը ՝ 4 Վտ
6. Լարում ՝ 5 Վ
7. Նշում է ՝ Ra> 90
8. Անջատիչ 501 կոճակով
9. Խեցու նյութ ՝ ABS, ակրիլային լույսի ծածկույթ
10. Չափերը ՝ արտաքին տրամագիծը 120 մմ, ներքին տրամագիծը ՝ 86 մմ
11. Էլեկտրաէներգիայի մատակարարում. USB պորտ էլեկտրամատակարարում
12. Մալուխի երկարությունը `1.5 մ

Փաթեթի ցուցակ
1. Օղակաձեւ LED լույս x 1
2. USB մալուխ x 1
3. Գունավոր փաթեթավորման տուփ x 1

Description

1. Adopt high quality PC+ABS materials, durable and sturdy.
2. Built-in 100mAh battery.
3. Light: warm and white light 3000K-4000K.
4. Cute and beautiful artifact for anchor live broadcast and show.
5. Fashion appearance design, looks pretty.
6. 3 levels of brightness fit demand under various scenes.
7. Compatible with most of smartphones, universal for iPhone, Samsung, Lenovo, Sony, HTC, LG, Xiaomi, Huawei and other smartphones.

Description

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.


About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material ) for Samsung Galaxy J7 (2017)
2. Replace the old, broken, cracked, damaged one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
 

Specification:

Description

1. Suitable length, convenient to use.
2. With high performance, Overcharge Protection, High-Temperature Protection.
3. Data Sync and Charging Cable.
4. With LED lights in full cables, when charging or sync data, you will see Led Light Lights up, very beautiful and cool.
 

Specification: