Latest products

Description

1. Portable and handheld is more convenient when using.
2. Small size, easy to carry and operate.
3. In case of emergency, LED flashlight makes safer at night.
4. Charged by cigarette lighter.
5. Ultra low noise level and power consumption, make super small vibration.
6. Product size: 16.5*8*20.5cm; weight: 1.2kg

Description

1) This is a nice tow rope with special processing procedure, it can absorb towing jerks and reduce the vibration of two cars to the lowest during towing
2) The fluorescent color makes it sager while being used at night
3) The forged hook with safety latch can prevent it from falling off the car and make it easier to take off or put on
4) It can help to tow your beloved car away from the place where it breaks down
5) Length: 3m
6) Capacity: 3 Tons

Description

Material: 45 # steel
Expanded maximum size: about 45mm/1.77in
Product Size: about 215 * 52 * 20mm/8.46 * 2.05 * 0.79in Easy to use and install
Built to exceed tool standards.
Removes and installs hose clamps
Ratcheting adjustment provides locking pliers jaw with four different fixed positions
Securely holds ring-style and Corbin clamps during removal or installation
Slot in swiveling jaw piece allows engaging clamp from any angle
Car Water Pipe Hose Remover Installer Tool Clip Clamp Plier VAG1921
Quantity: 1 Pc

Description

1. Power: 120W
2. Cylinder specifications: single cylinder
3. Attached equipment: tire pressure gauge
4. Lighting length: 600cm
5. Applicable objects: bicycle tires, ordinary car tires
6. Air pressure flow: 25L/min
7. Inflatable interface: threaded interface
8. Power cord length: 3 meters

Description

Instructions:
1. Insert the pin on one end of the charger into the car USB beforehand, and plug the other end into the USB socket on the top of the air pump to charge the air pump. The normal charging time is the first time after charging for 4 hours.
 2. Connect one end of the tire inflation joint to the air cylinder, and the other end to the tire valve core, then press the reverse button down. Please note that the order of the connections is important; at the same time, note that there are two types of pipe joints, American and French. The joint of the trachea itself is American, and the independent French joint is screwed to the American joint.
3. Power on button, the LCD screen starts to display, press again to start conversion between PSI, BAR, KAP, KG/CM four units, select the unit you want, set the button to set the pressure value you need, and finally press The lower power switch starts to inflate, and when inflated, the bottom LED of the air cylinder is bright.
4. Set button to pressure value setting button, press for slow adjustment, long press for quick adjustment, adjust to the appropriate pressing value of the inflation object; pressure value flashes for 4 seconds, automatically set, or press the switch to set .
5. Press the power switch. When the inflation pressure reaches the pressure value you set, the smart air cylinder will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn off the light.
6. When the inflation is over, quickly rotate the tire inflation joint from the valve core or the counterclockwise. Before the screwing out, carefully put the tire inflation joints hot; if there is a small leak in the moment, it is normal.
7. If it is judged that the tire pressure is too high, the tire tire inflation joint can be deflated at a suitable position on the valve core.
Product Information:
1. Temperature: 20 ° C ~ 70 ° C
2. Charging: Micro USB
3. Air efficiency: 2 minutes
4. Charging time: 2 hours
5. Battery capacity: 2000Am 12.4V
6. Net weight: 750G

Description

1. Material: chrome vanadium steel
2. Weight: 3kg
3. Size: 38x31.5cm
4. Number of kits: 67 pieces
5. Includes: 28 batch heads: one word: 3--4-5-6mm, cross: PH0-PH1-PH2-PH3, m character: PZ1-PZ2-PZ3, U type: U4-U6-U8, 12 Flower: M5-M6M8, Y type: Y2-Y3-Y4, flower type: T8-T10-T15-T20-T25-T27-T30-T40; batch handle; 6 inch needle-nosed pliers (150mm); 6 inch wire Pliers (150mm); 9-in-one metric folding allen wrench: 1.27-1.5-2-2.5-3-4-5-5.5-6mm; 12-24V vehicle voltmeter and lead-free tail cable with wire clip; 6 inch Adjustable wrench (150mm); 7 pieces of 3/8 '' short sleeve: 11-12-13-14-15-17-19mm; 10 pieces of 1/4 '' short sleeve: 4-4.5-5-5.5- 6-6.5-7-8-9-10mm; 2 pieces of 3/8 '' post: 75mm-150mm; 3/8 '' ratchet wrench; 3/8 '' to 1/4 '' conversion head; 3 / 8 "universal joint; 2 pieces of 3/8" spark plug sleeve 16mm-21mm; 3/8 "slider
6. Contains a carefully selected range of which are hand tools and sockets for automotive, mechanical, industrial and consumer applications and repairs
7. For all tasks and projects in the garage or workshop, a practical kit for engine and car repair
8. The tool is securely placed in a sturdy blow mold box for easy carrying and storage

Նկարագրություն

1. սիմ քարտի տեստեր

2. պորտի միանալու անցք

3. IP ունիվերսալ փորձարկիչ

Description

1. Gently remove dust & erase smudges from delicate equipment without leaving residue.
2. Perfect for cleaning digital SLR, SLR, digital camera lens, binocular lens, and telescope lens, filters, musical instruments, computers, keyboards, etc.
3. Soft and elastic, able to blow away the surface dirt easily.
4. Metal nozzle with inlet-valve .
5. Natural and environmentally friendly and non-toxic.
6. Better for the environment than canned air!
7. Light weight, small and handy

Description

1. Gently remove dust & erase smudges from delicate equipment without leaving residue
2. Perfect for cleaning digital SLR, SLR, digital camera lens, binocular lens, and telescope lens, filters, musical instruments, computers, keyboards, etc
3. Soft and elastic, able to blow away the surface dirt easily
4. Metal nozzle with inlet-valve
5. Natural and environmentally friendly and non-toxic
6. Better for the environment than canned air!
7. Light weight, small and handy .

Description

1. Resistance to high temperature of 500 ?°C.
2. Several hole locations for setting screws, IC chips and small parts.
3. Built-in scale ruler (0 ~ 36 cm ) on bottom section.
4. Make your repair work easy.
5. A good partner for hot air gun.
6. Only some small section is magnetic (marked on the pad), and can be used to hold screws firmly.
7. Several hole locations for setting screws, IC chips and small parts.
8. It is a bit weak, not so strong magnetic.

Description

1. Resistance to high temperature of 500 Degrees Celsius.
2. Several hole locations for setting screws, IC chips and small parts.
3. Built-in scale ruler (0 ~ 36 cm ) on bottom section.
4. Make your repair work easy.
5. A good partner for hot air gun.
6. Only some small section is magnetic (marked on the pad), and can be used to hold screws firmly.
7. Several hole locations for setting screws, IC chips and small parts.
8. It is a bit weak, not so strong magnetic.

Description

1. Resistance to high temperature of 500 Degrees Celsius.
2. Several hole locations for setting screws, IC chips and small parts.
3. Built-in scale ruler (0 ~ 36 cm ) on bottom section.
4. Make your repair work easy.
5. A good partner for hot air gun.
6. Only some small section is magnetic (marked on the pad), and can be used to hold screws firmly.
7. Several hole locations for setting screws, IC chips and small parts.
8. It is a bit weak, not so strong magnetic.