Anytek T900 Car DVRS Dash Cam Rear View Mirror Camera 1080P FHD Dual Lens ADAS Auto Registrar Video Recorder

Description

1. FM full frequency transmission function, 87.5-108.0MHZ
2. LCD screen display 1.4 inch
3. TF card functions(1G-32G), EQ mode
4. USB1: Output 5V/1A charging for phone
5. USB2: Output 5V/2A charging recognition
6. Bluetooth answer, hang up, reject and redial
7. Support Bluetooth stereo music playing
8. Automatic power-off memory function
9. Private answer
10. Support hard power switch
11. Power line with long line
12. The host supports two choices such as air vent holder and magnet holder
13. Support playing MP3&WMA format music
14. Support battery voltage detection
 

Specification:

Description

1. Conveniently holds 2 pairs of glasses/card/ticket/documents.
2. You can adjust it according to your requirements with 360 degree rotation system.
3. Fits all glasses and sunglasses,and also can hold cards,tickets,pens or documents, and many different things in place.
4. Safe for driver - easy to use while on the go.
5. No buttons or moving parts,just clip onto sunvisor or into car vent.
6. Store and protect your glasses: Don't put your expensive reading glasses or sunglasses to compartment where you have other things which could scratch them.
7. It fits to all type of visors and it's easy to install and remove.
 

Specification:

Description

1. Brand new and high quality
2. Easy to install and remove, durable and waterproof
3. Convenient to use, it can help you organize your inner car
4. The maxmium load capacity is 1.5kg
5. Perfect design, suitable for every bag

Specification:

Description

1. This is a DIY smart remote control key with a frequency of 433MHz with integrated chip.
2. The key consists of a key housing, key blade, circuit board, integrated chip and battery, which is a complete remote control key.
3. Before using, you need to program the key and cut the key piece at the car locksmith.
4. If your key has a different frequency or chip type, please do not buy it.
5. Material: metal + plastic.

Description

1) Type: Drink Holder
2) Material: PC
3) Function Perfect space for your to easy reach canned drink bottles, other small items; Conveniently load and unload on air-condition hole with clips; Keep drink cool or warm with the incar temperature when air-condition on; Flexible plate supplies alternative space for drink holder
4) Product size (L x W x H): 8.0 x 9.5 x 5.5 cm

Description

1. Easy effort, bearing power, smooth and smooth.
2. The elegant design upgrades the fashion of the car.
3. Easy to install, simple atmosphere, do not fade, beautiful and durable.
4. When turning car, it lessens the turning radius and helps beginners and lady drivers to drive safely and conveniently.
5. Size: 8x7x5cm
6. Material: Metal

Description

1. Safe and odorless, durable.
2. Large capacity, more convenient storage.
3. Use wear-resistant Oxford cloth, wear-resistant and dirt-resistant, strong and durable.
4. Size: 60 x 34 x 30cm
5. Fabric: Oxford cloth

Description

Instructions:
1. Insert the pin on one end of the charger into the car USB beforehand, and plug the other end into the USB socket on the top of the air pump to charge the air pump. The normal charging time is the first time after charging for 4 hours.
 2. Connect one end of the tire inflation joint to the air cylinder, and the other end to the tire valve core, then press the reverse button down. Please note that the order of the connections is important; at the same time, note that there are two types of pipe joints, American and French. The joint of the trachea itself is American, and the independent French joint is screwed to the American joint.
3. Power on button, the LCD screen starts to display, press again to start conversion between PSI, BAR, KAP, KG/CM four units, select the unit you want, set the button to set the pressure value you need, and finally press The lower power switch starts to inflate, and when inflated, the bottom LED of the air cylinder is bright.
4. Set button to pressure value setting button, press for slow adjustment, long press for quick adjustment, adjust to the appropriate pressing value of the inflation object; pressure value flashes for 4 seconds, automatically set, or press the switch to set .
5. Press the power switch. When the inflation pressure reaches the pressure value you set, the smart air cylinder will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn off the light.
6. When the inflation is over, quickly rotate the tire inflation joint from the valve core or the counterclockwise. Before the screwing out, carefully put the tire inflation joints hot; if there is a small leak in the moment, it is normal.
7. If it is judged that the tire pressure is too high, the tire tire inflation joint can be deflated at a suitable position on the valve core.
Product Information:
1. Temperature: 20 ° C ~ 70 ° C
2. Charging: Micro USB
3. Air efficiency: 2 minutes
4. Charging time: 2 hours
5. Battery capacity: 2000Am 12.4V
6. Net weight: 750G

Description

1. Aviation aluminum material, anodized, high-gloss process, extraordinary texture.
2. Mechanical design, the center of gravity does not shift, stable anti-bump.
3. Easy to install, plug and play, one clip is stable, easy to pick and place.
4. 360 degree rotation, adjust the angle at will, whatever you want.
5. Thick silicone pad, stable and does not hurt the phone.
6. Warm design, added insertable cable spot, use storage more convenient.
7. Material: Metal + ABS + silicone
 

Specification:

Description

1. Simple and easy for anyone easy change with ample numbers chips.
2. Various combinations and easy to use in your cars.
3. Simple design and suction cup method.
4. Night luminous, more convenient to use at night.
 

Specification: