Car Parking Reversing Sticker Wide View Angle Fresnel Lens

Description

Instructions:
1. Insert the pin on one end of the charger into the car USB beforehand, and plug the other end into the USB socket on the top of the air pump to charge the air pump. The normal charging time is the first time after charging for 4 hours.
 2. Connect one end of the tire inflation joint to the air cylinder, and the other end to the tire valve core, then press the reverse button down. Please note that the order of the connections is important; at the same time, note that there are two types of pipe joints, American and French. The joint of the trachea itself is American, and the independent French joint is screwed to the American joint.
3. Power on button, the LCD screen starts to display, press again to start conversion between PSI, BAR, KAP, KG/CM four units, select the unit you want, set the button to set the pressure value you need, and finally press The lower power switch starts to inflate, and when inflated, the bottom LED of the air cylinder is bright.
4. Set button to pressure value setting button, press for slow adjustment, long press for quick adjustment, adjust to the appropriate pressing value of the inflation object; pressure value flashes for 4 seconds, automatically set, or press the switch to set .
5. Press the power switch. When the inflation pressure reaches the pressure value you set, the smart air cylinder will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn off the light.
6. When the inflation is over, quickly rotate the tire inflation joint from the valve core or the counterclockwise. Before the screwing out, carefully put the tire inflation joints hot; if there is a small leak in the moment, it is normal.
7. If it is judged that the tire pressure is too high, the tire tire inflation joint can be deflated at a suitable position on the valve core.
Product Information:
1. Temperature: 20 ° C ~ 70 ° C
2. Charging: Micro USB
3. Air efficiency: 2 minutes
4. Charging time: 2 hours
5. Battery capacity: 2000Am 12.4V
6. Net weight: 750G

Description

Type:Stationery Holders
Material:Wood
1.Stand wear and tear
2.Mobile phones, tobaccos, etc, could be put into the pillar pocket
3.Soft materials are used to prevent children from being injured
4.Simple and easy design to facilitate your use
5.Fashion and good-looking
6.A good helper of your driving life
7.Non-toxic,odorless, reasonable design with good safety performance
8.Size: approx. 7cm(W) * 8.5cm(H) * 3.5cm(T)
9.Quantity: 1 Pair(2pcs)

Description

1. Plastic shell, glass mirror.
2. Internal installation of electronic, can be replaced at any time, simple and convenient.
3. It can shine at night.
4. It allows you to know the time when driving without glancing at your watch or cell phone, which ensures a safer driving experience.

Description

1. 4G full-wave wide-angle professional lens.
2. Using the latest wide dynamic technology, the imaging effect is better in bright/low light conditions.
3. High-definition highlight MIPI display.
4. The car starts automatic recording, and the flameout delay 5S automatically shuts down.
5. No gaps and no seconds continuous recording function, no data will be missed.
6. Built-in collision sensor, real-time three-axis stereo detection of vehicle collision state, abnormality starts mutation collision recording (this file will not be covered).
7. Powerful document protection function, sudden power failure, machine damage, etc., the video document will be completely saved.
8. Auto loop overwrite recording / The front and rear cameras can be switched freely, and the video files can be separated and placed separately. / temporary manual off, on recording / temporary manual emergency lock important recording / manually turning on, turning off recording / settable time to automatically turn off the screen, and closing the screen does not affect the normal recording work.
9. The video file can be played back at any time / without distortion HD camera, the image is clear and there is no smear.
10. Overvoltage and overcurrent protection.
Parameter:
1. Shooting sensor: 140A
2. Lens: HD 170 degree wide-angle night vision lens
3. Display screen: 4.0 inch 16:9 HD screen
4. Effective pixels: 1080*720 front lens
5. Video format: MOV
6. Video Compression: AVC1
7. Frame rate: 1080P/30f/s
8. Image format: JPEG
9. Photo size: up to 12M 4032*3024 resolution
10. Collision sensor: three-axis stereo collision detection
11. Record mode: AVI format, loop recording
12. Memory: Support TF memory card 4GB ~ 32GB
13. Working voltage: DC 5V
14. Working current: 750mA
15. Quiescent current: <200uA

Description

1) 5.0 inch 480*320 LCD color monitor
2) 2 video inputs
3) Rear view in priority
4) Video system: NTSC / PAL
5) Power supply: DC 12V±10%
6) Operation temperature：-20~50℃

Description

1. Weight: 125g
2. Size: 118*36*27mm
3. The standard of Liuzu 0-9 can meet most of the number requirements.
4. Independent Number Slot + Soft Magnetic Rubber Number Plate Design, Easy to Demolish, Easy to Adsorb
5. Instant hiding, temporary parking more convenient
6. Soft silica gel is used as base fixing material at the bottom, which can be firmly bonded by gentle pressing after placement.
 

Description

1. Compact size and lightweight, sturdy aluminum alloy enclosure.
2. Low distortion, acoustically accurate reproduction of music.
3. It features low noise, light weight, large power output and good sound quality.
4. Adopt the famous factory's high fidelity power to integrate and do power output, have characteristics that the sound is thick and warm, fine and smooth, sweet.
5. The tone network is monitored, adjusted repeatedly by the reputable fan, make the high pitch of this machine penetrating and fine and smooth, bass is durable and strong.
6. Have overheated and overload, short out and protect the function.
7. Compatible with car, motorcycle, MP3, computer speaker and other audio applications.
 

Specification:

Description

1. Made of zinc alloy with a plastic cover shell, durable in use.
2. Color coded for easy identification.
3. Suitable for Car LED/Car Black box/Car alarms/Remote starters/Car locators (theft recovery systems)/Engine block heaters/DVD players/Satellite radio/GPS/Cell phone charger.
4. Easy to use and carry.
5. Ampere Rating: 5A 7.5A 10A 15A 20Amp
6. This In-line Fuse Holder Designed for turn one slot into two.
7. Package:
1 x Fuse Holder
1 x Fuse Puller
5 x 5Amp
5 x 7.5Amp
5 x 10Amp
5 x 15Amp
5 x 20Amp

Description

1. Easy to install and easy to clean.
2. Small and flexible, scratch-resistant and stable.
3. Strong and light.
4. Material: plastic
5. Size: 8.5x18.6x6.6cm

Description

1. Size and quantity: Height: 2.3cm, diameter:1cm, 4pcs in one package
2. Material and application: stainless steel, copper core, american valve cap, applicable for universal bicycle car
3. Function: Simply install on the air valve. According to the recognized color to display the pressure of the tire, red and yellow indication bar: tire pressure at below 2.0 Bar (Less than 75% of the standard), DANGER; Yellow and Green indication bar: tire pressure at 2.3-2.0 Bar (Less than 90% of the standard), WARNING; Green indication bar: tire pressure at normal range 2.4 Bar, SAFE.