AP1001 Car Auto 360 Degree Adjustable Baby Safety Convex Mirror

Description

1. Made of ABS and PVC materials,it is sturdy and anti-skid.
2. Universal clip design, suitable for the device width is between 55 to 88mm.
3. It is compatible with 6.0 inch or smaller mobile phones and navigators.
4. With two-standard crack design, it can be easily fixed on vent fan does not block sight to ensure safe driving.
5. The flexible clip enabled assemble and unassembled conveniently, it can-be 360-degree rotated to get the most comfortable angle.
 

Specification:

Description

1. Car vent mounted clamping type mobile phone stand.
2. Clamping type, not easy to fall off, stable for using.
3. Compact size, flexible and portable.
4. After the device is powered on 5V-9V DC power supply, the blue indicator light will be on. When the object is close to the device 5cm-20cm, the automatic induction will open the arms and put the phone into the phone bracket, the device will automatically clamp the phone. At this point, wireless charging will automatically charge the phone, charging green light( mobile phone with wireless charging function) when you remove the phone you need to touch the back of the shell at the top of the sensing point, the device automatically open double arm, then remove the phone.
5. This device has over-voltage protection, over temperature protection, magnetic field protection, short circuit protection, if the equipment is abnormal, it will automatically stop working.
6. Two wireless charging modes:
Support QC wireless fast charging equipment / standard charging mode: compatible with all Qi-enabled devices.

Description

1. Easy to install.
2. Durable and reliable.
3. Made of aluminum alloy, which is anti-corrosion.
4. Suitable for 60-100mm Device
5. Weight: 158g

Description

1. Plug controller into the socket of smoke source. Or plug the power adapter in the power socket.
2. Dial direction switch key, massage pillow enter into massaging state. We suggest that you massage 10-15 minutes every time.
3. Please dial the direction switch to middle position, then cut the smoke source or power adapter.
4. Input voltage: 12V.
5. Input current: 1.5-2V.
6. Rated power: 20W.
7. 4 heated rollers in total.
8. Excellent health products for you, or gifts for your families.
 

Specification:

Description

1. Supports gravity sensing, loop recording, TF card (maximum 32G), auto reversing view, camera, motion detection, delay shutdown, recording function, night vision fill light.
2. Easy to install and operate.
3. Dual recording front and back, full screen rear view, full screen front.
4. The design of the lens can be pulled out, which better fits the rear view effect of original cars, and the rear view WDR has wide dynamic processing.
5. Parameters:
Processor type: GPCV6248
NAND Flash: 4M
Display: 10-inch MIPI IPS highlight screen
Display resolution: up to 320x1280
Speaker: 1W 8R
MIC: 4015
Cable length: 6m
Video format: AVI
Picture format: JPEG
Storage compression method: MJEPG
Language support: Support multiple languages
Front camera video quality: up to 1920 ?? 1080 (30fps) / HD1280 ?? 720 (30fps)
Rear camera video quality: VGA
Photo resolution: up to 8M
Working voltage: 5 (V)

Description

1. Size: 10.7*11.2*5.2 cm
2. Weight: 83g
3. Applicable to 7.5CM-10CM mobile phone width
4. Simple installation and easy to use
5. Applicable to Android devices

Description

1. Made of zinc alloy with a plastic cover shell, durable in use.
2. Color coded for easy identification.
3. Suitable for cars, SUV, boats, motorcycles, home, industrial applications and so on.
4. Easy to use and carry.
5. Ampere Rating: 3A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A
6. Fuse Holders Feature:
Temperature Rise: 50 degree Celsius Max.
Volts: 32V
Length: 15cm
7. Package Included:
10 PCS x 3A
10 PCS x 5A
10 PCS x 7.5A
10 PCS x 10A
10 PCS x 15A
10 PCS x 20A
10 PCS x 25A
10 PCS x 30A
10 PCS x 35A
10 PCS x 40A
1 x Test pencil
1 x Fuse Fuller
5 PCS x Fuse Holder
10 PCS x Wiring clamp(5 x Red;5 x Blue)
10 PCS x Cable ties

Description

Instructions:
1. Insert the pin on one end of the charger into the car USB beforehand, and plug the other end into the USB socket on the top of the air pump to charge the air pump. The normal charging time is the first time after charging for 4 hours.
 2. Connect one end of the tire inflation joint to the air cylinder, and the other end to the tire valve core, then press the reverse button down. Please note that the order of the connections is important; at the same time, note that there are two types of pipe joints, American and French. The joint of the trachea itself is American, and the independent French joint is screwed to the American joint.
3. Power on button, the LCD screen starts to display, press again to start conversion between PSI, BAR, KAP, KG/CM four units, select the unit you want, set the button to set the pressure value you need, and finally press The lower power switch starts to inflate, and when inflated, the bottom LED of the air cylinder is bright.
4. Set button to pressure value setting button, press for slow adjustment, long press for quick adjustment, adjust to the appropriate pressing value of the inflation object; pressure value flashes for 4 seconds, automatically set, or press the switch to set .
5. Press the power switch. When the inflation pressure reaches the pressure value you set, the smart air cylinder will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn off the light.
6. When the inflation is over, quickly rotate the tire inflation joint from the valve core or the counterclockwise. Before the screwing out, carefully put the tire inflation joints hot; if there is a small leak in the moment, it is normal.
7. If it is judged that the tire pressure is too high, the tire tire inflation joint can be deflated at a suitable position on the valve core.
Product Information:
1. Temperature: 20 ° C ~ 70 ° C
2. Charging: Micro USB
3. Air efficiency: 2 minutes
4. Charging time: 2 hours
5. Battery capacity: 2000Am 12.4V
6. Net weight: 750G

Description

• Item Volume:150pcs
• Material Type:Copper, rubber
• Item Weight:80g

Features:
Easy and simple to use.
Can be used to connect internal wiring.
Non-insulated mixed female spade crimp terminal connector kit including 2.8mm/4mm/4.8mm/6.3mm.
Comes with insulating sleeves safe to use and plastic box to store the terminals.
Wire crimp type can be used to home appliances, auto, audio system for battery or rocker switch quick connecting/disconnecting.

Specification:
Type: Male and Female Car Spade Connector
Material: Copper, rubber
Quantity: 150pcs
Item Color: As shown
Storage Box Size: 13*7*2.2cm / 5.1*2.8*0.9" (L*W*H)
Net Weight: 0.08kg / 2.8oz

Package:
15*6.3MM Male Terminal
15*6.3MM Female Terminal
15*4.8MM Male Terminal
15*4.8MM Female Terminal
15*4MM Male Terminal
15*4MM Female Terminal
15*2.8MM Male Terminal
15*2.8MM Female Terminal
30*4MM Insulating Sleeve
1*Package Box

Description

1. This is a DIY smart remote control key with a frequency of 433MHz with integrated chip.
2. The key consists of a key housing, key blade, circuit board, integrated chip and battery, which is a complete remote control key.
3. Before using, you need to program the key and cut the key piece at the car locksmith.
4. If your key has a different frequency or chip type, please do not buy it.
5. Material: metal + plastic.