Original LCD Display + Touch Panel for Galaxy J3 (2016) / J310 / J3109, J320FN, J320F, J320G, J320M, J320A, J320V, J320P(Black)

Description

1. 2 in 1 interface design for the 1A charging and speaker connection.
2. Small and easy to carry.
3. The built-in decoding chip enables fast reading of mobile phone audio data through stable and rapid transmission. Transmit in high code rate with a less noise and better fidelity of sound.
4. 3.5mm interface only for music, call is not supported.
5. 8 Pin port only for charging, does not support the use of data transmission.
6. Durable material and not easy to break, it is made for fully flexible TPE material to protect the wire core.
 

Specification:

Description

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

About the product
1. Replacement LCD Screen + Touch Panel Digitizer Assembly for Samsung Galaxy J7 (2016) / J710F
2. Replace the old, broken, cracked, damaged one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
 

Specification:

Description

1. Steady distinguish, nice sound quality.
2. High grade material with quality surface treatment, more durable.
3. Small and portable, plug and play.
4. Suitable for Headphones with a lighting interface.

Description

Product parameters
1.length: 1.2 M
2.current: 3A (MAX)
3.material:: PVC (flame retardant)
4.function: transmission / charging
5.Available: Micro USB/8 Pin/Type-C
6.size:108x25x215mm weight :45g

Description

1. Material: zinc alloy
2. Size: 34x12x16mm
3. Weight: 6g
4. Wire control: support original 8 Pin headset
5. Microphone; support original 8 Pin headset
6. Charging port: 8 Pin interface; charging current: 2A
7. Colorful indicator light

Description

1. Support listening to music while charging.
2. Intelligent decoding chip, light speed transmission, high fidelity sound quality.
3. It can be inserted and removed 10,000 times and has a long service life.
4. Plug and play, maximum 2.4A current output, stable high-speed charging.
5. Intelligent temperature control, charging is not hot.
6. Support iOS 10.2 system and above, for iPhone Xs Max / XS / XR / X / 8P / 8 / 7.
7. AK shape, no need to remove the protective cover when using.
8. The fine grinding process of aluminum alloy is comfortable and does not oxidize.
9. Mini size, easy to carry.

Description

1. With 6 USB ports.
2. With LCD digital display.
3. Suitable for home, office, travel and other indoor use.

Specification:
1. Input: AC 100-240V, 50-60Hz, 0.22A.
2. Total power: 30W.
3. Output: 5V 6A (maximum).
4. Single USB interface output: 5V 2.4A (maximum).

Description

About the product
1. Replacement LCD Screen + Touch Panel Digitizer Assembly for Samsung Galaxy J5 / J500
2. Replace the old, broken, cracked, damaged one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Advantages
1. Large stock, fast delivery, can meet large purchasing plan
2. Original top quality.
3. Complete fit and work
4. Supply quality warranty with professional service
 

Specification:

Description

About the product
Sim Card Tray Holder Eject Pin Key Tool:
1. SIM Tray/Holder Opening Key Specially made for iPhone 4 & 4S, 3GS & 3G, iPad 3G / New iPad 4G use. With this key, to change your card anytime anywhere.
2. Without scratching your iPhone 4 & 4S, 3GS & 3G, iPad 3G / New iPad with other objects.
Adapter :
1. Nano SIM Adapter can convert your nano sim card to micro sim card and standard sim card, then you can use one nano sim card in all mobile devices
2. Nano SIM card to micro sim card adapter for iPhone 4 & 4S, 3GS & 3G, iPad 3G / New iPad
3. Nano SIM card to standard sim card adapter for iPhone 5
4. So convenient!
5. Easy to carry
6. Precise design
Notice: With double sided tape , more stability!

Description

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

About the product
1. Replacement LCD display + touch screen digitizer assembly for Nokia 3.2.
2. Replace the old, broken, cracked, damaged one.
3. Make your device look more refreshing than ever.
4. Completely fit and work.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.