10 in 1 (4 x Screwdriver + 2 x Teardown Rods + 1 x Chuck + 2 x Triangle on Thick Slices + Eject Pin) Disassembly Repairing Tool for Smart Phones

Description

Features
1. Brand New
2. All in one cutter
3. Can be used as Nano SIM cutter & Micro SIM cutter

Usage
1. This shear calipers accurate the ordinary phone card cut into Nano SIM & Micro SIM size.
2. This shear calipers using high-quality stainless steel, quality assurance!
3. Skills: the need to cut the SIM card is fully inserted into the card slot, and attention must be fully inserted into it in place, then the "rapid force" cut card reader is closed, cut cards to complete, please note that "fast hard" This cut out the card edge neatly. The remaining portion of the card peripheral hand finishes cutting the card after pinching forced to pull out on it.
4. Note: on the table when the cut card, pressure, or pressing the cut card reader the very end to avoid entrapment own hands.

Description

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Samsung Galaxy J120
2. Replace the old, broken, cracked, damaged one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
 

Specification:

Description

1. Material: TPE + high density nylon braided wire
2. Current: 1.5A
3. Transmission speed: 480Mbps
4. Applicable equipment: Type-c interface equipment
5. Resistant to pull, not easy to break, long service life
6. Bring your own colorful breathing light
7. Double suction cup design, strong pressure on the back of the phone

Description

About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Samsung Galaxy J7 (2017) / J730
2. Replace the old, broken, cracked, damaged one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
 

Specification:

Description

1. Super purity copper conductor, ensuring a high quality.
2. A convenient charging and syncing combo delivered through a cable.
3. Complete charge and sync compatibility with Samsung Galaxy S7 / S6 / S6 edge / S6 edge+ / Note 5 Edge, HTC, Son, Huawei, Xiaomi.
4. Resist high pressure with excellent design.
5. High speed data transmission and charging, compatible with any USB version.
 

Specification:

Description

Brand: CaseMe
Name: Magnetic charging cable
Connector width: about 0.7 cm
Material: aluminum alloy nylon
Line length: 1 meter
Voltage and current: 5V 2.4A
Specification: 65x0.08x2
Tip: This charging cable is only for charging, not for data transmission.
Product features No need to plug and unplug, extend the life of the phone interface, put it on, the magnetic head can be used as a dust plug

Description

1. Length: 1m; Weight: 28g
2. External material: PVC
3. Connector material: TPE
4. Core: 72 tinned copper, wire diameter 0.1mm
5. Maximum passing current 2A
6. Fast charging and long service life

Description

About the product
1. The product concludes: one telephoto lens,one clip,one cleaning cloth,and one instructions manual.
2. The telescope has 8 times zoom, which can adjust the focal length well.
3. The telescope can be used as a monocular.
4. Alomost all kinds of mobile phones,include flip phones and bar phones,which has back camera,can be connected to the telescope through the clip.With it,mobile phone's quality of imaging can be improved evidently.
5. Applicable to watch the game, concerts, tourism, observe animal lovers, news reporter long-distance shooting etc.
6. Private detective taking pictures forensics, geological exploration, forestry management, railway port scheduling and etc.
 

Specification:

Description

About the product
1. Replacement touch Panel for LEAGOO M9.
2. Replace the old, broken, cracked, damaged one.
3. Make your device look more refreshing than ever.
4. Completely fit and work.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Description

1. Replacement LCD display + touch screen digitizer assembly for HTC Desire 825.
2. Replace the old, broken, cracked, damaged one.
3. Make your device look more refreshing than ever.
4. Completely fit and work.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
Specification: